• Aug , 27 2020

Silicon nitride is very strong, especially hot-pressed silicon nitride, which is one of the hardest materials in the world. It has high strength, low density, high temperature resistance and other properties. It is extremely resistant to high temperatures, and its strength can be maintained to a high temperature of 1200°C without falling. It will not melt into a melt after being heated, and will n...

• Sep , 03 2020

The Features Of Small Plastic Ball Bearing : 1. The whole plastic bearing is lubricating material with long service life; while the lubricating layer of metal sliding bearing is only 0.003mm PTFE on the surface, when this thin layer of friction is finished, it will declare the end of service life; 2. The use of plastic bearings will not rust and is corrosion resistant, and metal bearings are easy ...

• Sep , 15 2020

MKL BEARING can produce 6 balls with diameter 3/16 inch balls and the 7 balls diameter is  5/32 inch. The Features of 6 Balls Bearings : 1.6 bigger balls diameter aer larger than 7 balls ,so they are stronger and hte speed can be faster. 2.with larger balls ,608 bearings can with less friction at the same wheel RPM 3.With 6 balls ,bearing can roll farther with the reduced friction and ball ro...

• Nov , 04 2020

The Advantages of Hybrid Ceramic Bearings: Hybrid ceramic bearings may be relatively uncommon, and the main configuration of hybrid ceramic bearings are produce with material inner and outer ring bearing steel / stainless steel / plastic + ceramic ball + PA66 / stainless steel / steel retainer + 2RS/ZZ or an open combination. Hybrid ceramic bearings have the following four advantages during use. 1...

• Jan , 01 2021

Silicon Nitride Si3N4 Ceramic is one kind of technical ceramic materials which has good comprehensive properties for different applications. Its mechanical strength can be kept up to 1200℃. Its hardness and wear resistance performance ranks high among all technical ceramic materials. It has high electrical resistivity, high dielectric constant and low dielectric loss, is a choice for electrical in...

• Jul , 14 2021

SUS440C Stainless steel Material    Specification C Cr Mn Si P S Mo 0.95-1.20% 16-18% 1.0%Max 1.0%Max 0.04%Max 0.03%Max 0.75%Max Mechancial Properties Tensile Strength 285,000 psi Yield Strength 275,000 psi Density 0.277 Ibs/cu in Physical Property Corrosion resistance Fair Magnetic Yes Size Range 0.8mm  ( 1/32" )    to    63.5mm   ( 2-1/2" ) Hardness H...